- Model 10/20 Holiday Detector -

800 volts to 35,000 volts
in 1 instrument


 

The Latest in Holiday Detector Technology

The D. E. Stearns Company, the originator of the holiday detector, introduces the Model 10/20 high voltage holiday detector. The Model 10/20 is the product of more than three years of development and two years of testing in the field. The instrument represents the latest in electronics in the industry, with a new design and numerous improvements.

This pulsating DC holiday detector with regulated voltage has a range of 800 volts to 35,000 volts, giving complete coverage for coating specifications. 10/20
The instrument has been ergonomically designed with an angled handle and an open grip design that takes into account different hand and glove sizes.

Features:

  • 800 volts to 35,000 volts in one instrument
  • Safety feature for increased jobsite safety
  • Digital voltmeter display
  • LED Holiday Indicator - Easily seen in bright daylight
  • Volume controls for noisy environments
  • Regulated voltage
  • Large push button controls
  • Greater battery efficiency
  • Compatible with components and accessories of Models 10, 20 & 20S
Of the new features, one of the most important is the patent pending safety switch. This trigger system provides greater jobsite safety for both the operator and nearby personnel and is very easy to use. Simply release the trigger, and the instrument instantly turns off.

The handle must be held down on the grip to operate the instrument, and the unit is shut down immediately when the handle is released. This feature will increase jobsite safety as an instrument cannot be left energized while unattended.

After setting the voltage, the instrument remembers the setting and the range, so the instrument can be turned on and off as much as necessary without requiring further adjustements.

Safety

The instrument is controlled by an electronics package contained within the water impenetrable cover of the instrument. All control switches are push button operations, with large operational areas, easy to manipulate while wearing gloves. Controls include On, Low and High voltage ranges, LCD voltmeter display, the voltage setting switch, Loud and Louder volume controls and the wand handle release button.

Just below the LCD voltmeter display is the visual alert for holiday indications. This alert is made of a cluster of "super bright" LEDs that are easily seen in bright daylight conditions.

The voltage selection switch is located just above the LCD voltmeter display and is sealed from weather and dust by a screw cap. Using the supplied screwdriver, the dust cap is removed and voltages are set by turning the voltage selector as shown in the graphics. On the Low voltage range, select between 800 volts and 8,000 volts. On the High voltage range, select between 3,500 volts and 35,000 volts.

The LCD voltmeter display shows voltages in kilovolts (kV). So, a voltage setting of 800 volts would be displayed as 0.8 and a voltage selection of 35,000 volts would be shown as 35.0. The audible alert speaker is located in the middle of the top of the instrument. The Loud setting is recommended for normal operations, where ambient noise levels are normal. For louder areas, where ear protection may be required, the Louder volume setting may be used.

The Model 10/20 comes complete in kit form, including:

  • Model 10/20 instrument and battery
  • Spare battery
  • Battery holder (batt box)
  • Ground cable, 20'
  • Wand handle, 18", with full circle spring electrode connector (Compax conn.)
  • 4" Rubber inspection paddle
  • Battery charger, 110v A/C (220v A/C available)
  • Screwdriver
  • Carrying case (NEW!)
  • Instruction manual
  • Certificate of Calibration
  • And your choice of electrode*
Controls
*Electrode choice is made from the the Full Circle Spring Electrodes, 2" to 36" pipe diameters, or the Half Circle Spring Electrodes, 2" to 8" pipe diameters or the Silicone-Rubber brush electrdodes, 2" to 8" widths. You may choose one electrode per instrument, within the size ranges listed. Other sizes are available at an additional cost. Please call or e-mail for more information: +1 (318) 635-5351 or Info e-mail.
 

The new carrying case (on Right) is included with the Model 10/20. The new carrying case is made of light resin materials and is weather and dust sealed. The custom foam inserts keeps the instrument and all components safe and secure during shipping and handling. The inline wheels and padded handles make for easy mobility, and itsstreamlined size makes it easy for storage on the truck or in the shop.The latches are strong but easy to open, with a push button lock on each. The case has molded lock catches for your own padlock or other locking mechanism.

1020 Case

  

Contact Us